Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

To bend the needle tip, use wire cutters to cut off the sharp part of the syringe tip, then use pliers to open the tip (press on the ends of the tip that were squished by the wire cutter) and bend the tip about halfway up to the desired angle. Opening the tip is more important for the lower %s as the formula becomes harder to push out of the syringe. 

 

Tweak the ratio of mineral oil to Vaseline to mineral oil for desired consistency. Lower ratios will be harder to push out of the syringe, higher ratios will be easier.